SiemensS7NetWriteAsync 方法

异步写入支持Hsl特性的数据，返回是否写入成功，该特性为HslDeviceAddressAttribute，详细参考api文档说明
Asynchronously write data that supports the Hsl attribute, and return whether the write was successful. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details.

异步写入double数据，返回是否成功
Asynchronously write double data, return whether the write was successful

异步写入double数组，返回是否成功
Asynchronously write double array, return whether the write was successful

异步写入short数据，返回是否成功
Asynchronously write short data, returns whether success

异步写入short数组，返回是否成功
Asynchronously write short array, return whether the write was successful

异步写入int数据，返回是否成功
Asynchronously write int data, return whether the write was successful

异步写入int[]数组，返回是否成功
Asynchronously write int array, return whether the write was successful

异步写入long数据，返回是否成功
Asynchronously write long data, return whether the write was successful

异步写入long数组，返回是否成功
Asynchronously write long array, return whether the write was successful

异步写入float数据，返回是否成功
Asynchronously write float data, return whether the write was successful

异步写入float数组，返回是否成功
Asynchronously write float array, return whether the write was successful

异步写入字符串信息，编码为ASCII
Asynchronously write string information, encoded as ASCII

异步写入ushort数据，返回是否成功
Asynchronously write ushort data, return whether the write was successful

异步写入ushort数组，返回是否成功
Asynchronously write ushort array, return whether the write was successful

异步写入uint数据，返回是否成功
Asynchronously write uint data, return whether the write was successful

异步写入uint[]数组，返回是否成功
Asynchronously write uint array, return whether the write was successful

异步写入ulong数据，返回是否成功
Asynchronously write ulong data, return whether the write was successful

异步写入ulong数组，返回是否成功
Asynchronously write ulong array, return whether the write was successful

写入PLC的一个位，例如"M100.6"，"I100.7"，"Q100.0"，"DB20.100.0"，如果只写了"M100"默认为"M100.0"
Write a bit of PLC, for example "M100.6", "I100.7", "Q100.0", "DB20.100.0", if only write "M100" defaults to "M100.0"

[警告] 向PLC中写入bool数组，比如你写入M100,那么data[0]对应M100.0，写入的长度应该小于1600位
[Warn] Write the bool array to the PLC, for example, if you write M100, then data[0] corresponds to M100.0, The length of the write should be less than 1600 bits

向PLC中写入byte数据，返回值说明
Write byte data to the PLC, return value description

将数据写入到PLC数据，地址格式为I100，Q100，DB20.100，M100，以字节为单位
Writes data to the PLC data, in the address format I100,Q100,DB20.100,M100, in bytes

向PLC中写入时间格式的数据
Writes data in time format to the PLC

使用离散的方式，同时写入多个数据块到不同的地址中去，但是支持的地址数量及写入数据的最大长度是有限制的，不能超过pdu长度限制。
Using the discrete method, multiple blocks of data are written to different addresses at the same time, but the number of supported addresses and the maximum length of the data written are limited, and cannot exceed the PDU length limit.

异步写入指定长度的字符串信息，如果超出，就截断字符串，如果长度不足，那就补0操作，编码为ASCII
Asynchronously write string information of the specified length. If it exceeds the value, the string is truncated. If the length is not enough, it is filled with 0 and the encoding is ASCII.

将指定的字符串写入到西门子PLC里面去，将自动添加字符串长度信息，方便PLC识别字符串的内容。
Write the specified string into Siemens PLC, and the string length information will be automatically added, which is convenient for PLC to identify the content of the string.

异步写入指定长度的字符串信息，如果超出，就截断字符串，如果长度不足，那就补0操作，编码为指定的编码信息
Asynchronously write string information of the specified length. If it exceeds the value, the string is truncated. If the length is not enough, then the operation is complemented with 0 , you should specified the encoding information