HslCommunication.Profinet.Inovance 命名空间 |
[缺少 "N:HslCommunication.Profinet.Inovance" 的 <summary> 文档]
类| 类 | 说明 | |
|---|---|---|
 | InovanceComputerLink |
汇川的计算机链接协议，使用PLC得COM1口，设置 D8126=06h, D8120.14=1 才能正常通信。 Inovance's computer connection protocol, when using the COM1 port of the PLC, requires setting D8126=06h and D8120.14=1 for normal communication. |
| InovanceConnectedCipNet |
汇川的CIP协议，基于连接的协议
|
| InovanceEasyNet |
Easy系列的通信协议，使用的是专用的报文，地址说明参考Demo界面
|
| InovanceEasyNetMessage |
汇川的Easy系列的报文类，使用专用的报文头，地址说明参考Demo界面
|
| InovanceHelper |
汇川PLC的辅助类，提供一些地址解析的方法 Auxiliary class of Yaskawa robot, providing some methods of address resolution |
| InovanceSerial |
汇川的串口通信协议，A适用于AM400、 AM400_800、 AC800、H3U, XP, H5U 等系列底层走的是MODBUS-RTU协议，地址说明参见标记 Huichuan's serial communication protocol is applicable to AM400, AM400_800, AC800 and other series. The bottom layer is MODBUS-RTU protocol. For the address description, please refer to the mark |
| InovanceSerialOverTcp |
汇川的串口转网口通信协议，A适用于AM400、 AM400_800、 AC800、H3U, XP, H5U 等系列底层走的是MODBUS-RTU协议，地址说明参见标记 Huichuan's serial communication protocol is applicable to AM400, AM400_800, AC800 and other series. The bottom layer is MODBUS-RTU protocol. For the address description, please refer to the mark |
| InovanceTcpNet |
汇川的网口通信协议，A适用于AM400、 AM400_800、 AC800、H3U, XP, H5U 等系列底层走的是MODBUS-TCP协议，地址说明参见标记 Huichuan's serial communication protocol is applicable to AM400, AM400_800, AC800 and other series. The bottom layer is MODBUS-TCP protocol. For the address description, please refer to the mark |
枚举| 枚举 | 说明 | |
|---|---|---|
 | InovanceSeries |
汇川的系列枚举信息
|