HslCommunication.Profinet.Fuji 命名空间

基于Command-Setting-Type通信模式的协议实现，地址格式参数DEMO界面
Protocol implementation based on Command-Setting-Type communication mode, address format parameter DEMO interface

富士Command-Setting-type协议实现的虚拟服务器，支持的地址为 B,M,K,D,W9,BD,F,A,WL,W21,W9。具体的支持列表参考api文档
The virtual server implemented by Fuji Command-Setting-type protocol supports addresses B, M, K, D, W9, BD, F, A, WL, W21, W9. For the specific support list, please refer to the api documentation

富士PLC的SPB协议，详细的地址信息见api文档说明，地址可以携带站号信息，例如：s=2;D100，PLC侧需要配置无BCC计算，包含0D0A结束码
Fuji PLC's SPB protocol. For detailed address information, see the api documentation, The address can carry station number information, for example: s=2;D100, PLC side needs to be configured with no BCC calculation, including 0D0A end code

富士SPB的辅助类

富士PLC的SPB协议，详细的地址信息见api文档说明，地址可以携带站号信息，例如：s=2;D100，PLC侧需要配置无BCC计算，包含0D0A结束码
Fuji PLC's SPB protocol. For detailed address information, see the api documentation, The address can carry station number information, for example: s=2;D100, PLC side needs to be configured with no BCC calculation, including 0D0A end code

富士的SPB虚拟的PLC，线圈支持X,Y,M的读写，其中X只能远程读，寄存器支持D,R,W的读写操作。
Fuji's SPB virtual PLC, the coil supports X, Y, M read and write, X can only be read remotely, and the register supports D, R, W read and write operations.

富士PLC的SPH通信协议，可以和富士PLC进行通信，ConnectionID默认CPU0，需要根据实际进行调整。
The SPH communication protocol of Fujifilm PLC can communicate with Fujifilm PLC, ConnectionID default CPU0, which needs to be adjusted according to the actual situation.

富士的SPH虚拟的PLC，支持M1.0，M3.0，M10.0，I0，Q0的位与字的读写操作。