NetSimplifyServer 类 |
命名空间: HslCommunication.Enthernet
NetSimplifyServer 类型公开以下成员。
名称 | 说明 | |
---|---|---|
NetSimplifyServer |
实例化一个默认的对象 Instantiate a default object |
名称 | 说明 | |
---|---|---|
ActiveTimeSpan |
获取或设置两次数据交互时的最小时间间隔,默认为24小时。如果超过该设定的时间不进行数据交互,服务器就会强制断开当前的连接操作。 (继承自 NetworkAuthenticationServerBase。)Get or set the minimum time interval between two data interactions, the default is 24 hours. If the data exchange is not performed for more than the set time, the server will forcibly disconnect the current connection operation. | |
ClientCount |
当前在线的客户端数量
| |
EnableIPv6 |
获取或设置服务器是否支持IPv6的地址协议信息 (继承自 NetworkServerBase。)Get or set whether the server supports IPv6 address protocol information | |
GetOnlineSessions |
获取当前所有在线的客户端信息,包括IP地址和端口号信息 (继承自 NetworkAuthenticationServerBase。)Get all current online client information, including IP address and port number information | |
IsStarted |
服务器引擎是否启动 (继承自 NetworkServerBase。)Whether the server engine is started | |
IsUseAccountCertificate |
获取或设置是否对客户端启动账号认证 (继承自 NetworkAuthenticationServerBase。)Gets or sets whether to enable account authentication on the client | |
LogNet |
组件的日志工具,支持日志记录,只要实例化后,当前网络的基本信息,就以DEBUG等级进行输出 (继承自 NetworkBase。)The component's logging tool supports logging. As long as the instantiation of the basic network information, the output will be output at DEBUG | |
OnlineCount |
获取在线的客户端的数量 (继承自 NetworkAuthenticationServerBase。)Get the number of clients online | |
Port |
获取或设置服务器的端口号,如果是设置,需要在服务器启动前设置完成,才能生效。 (继承自 NetworkServerBase。)Gets or sets the port number of the server. If it is set, it needs to be set before the server starts to take effect. | |
SocketKeepAliveTime |
获取或设置客户端的Socket的心跳时间信息,这个是Socket底层自动实现的心跳包,不基于协议层实现。默认小于0,不开启心跳检测,如果需要开启,设置 60_000 比较合适,单位毫秒 (继承自 NetworkServerBase。)Get or set the heartbeat time information of the Socket of the client. This is the heartbeat packet automatically implemented by the bottom layer of the Socket, not based on the protocol layer. The default value is less than 0, and heartbeat detection is not enabled. If you need to enable it, it is more appropriate to set 60_000, in milliseconds. | |
Token |
网络类的身份令牌,在hsl协议的模式下会有效,在和设备进行通信的时候是无效的 (继承自 NetworkBase。)Network-type identity tokens will be valid in the hsl protocol mode and will not be valid when communicating with the device |
名称 | 说明 | |
---|---|---|
AddAccount |
新增账户,如果想要启动账户登录,必须将IsUseAccountCertificate设置为True。 (继承自 NetworkAuthenticationServerBase。)Add an account. If you want to activate account login, you must set IsUseAccountCertificate to True | |
AddClient |
新增一个在线的客户端信息 (继承自 NetworkAuthenticationServerBase。)Add an online client information | |
AppSessionRemoteClose |
让客户端正常下线,调用本方法即可自由控制会话客户端强制下线操作。
| |
AsyncAcceptCallback |
异步传入的连接申请请求 (继承自 NetworkServerBase。)Asynchronous incoming connection request | |
CheckRemoteToken |
检查当前的头子节信息的令牌是否是正确的,仅用于某些特殊的协议实现 (继承自 NetworkBase。)Check whether the token of the current header subsection information is correct, only for some special protocol implementations | |
CloseAction |
关闭网络的操作
(重写 NetworkAuthenticationServerBaseCloseAction.) | |
ConnectHslAlientClient |
创建一个指定的异形客户端连接,使用Hsl协议来发送注册包 (继承自 NetworkServerBase。)Create a specified profiled client connection and use the Hsl protocol to send registration packets | |
ConnectHslAlientClientAsync |
创建一个指定的异形客户端连接,使用Hsl协议来发送注册包 (继承自 NetworkServerBase。)Create a specified profiled client connection and use the Hsl protocol to send registration packets | |
CreateSocketAndConnect(String, Int32) |
创建一个新的socket对象并连接到远程的地址,默认超时时间为10秒钟,需要指定ip地址以及端口号信息 (继承自 NetworkBase。)Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number. | |
CreateSocketAndConnect(IPEndPoint, Int32, IPEndPoint) |
创建一个新的socket对象并连接到远程的地址,需要指定远程终结点,超时时间(单位是毫秒),如果需要绑定本地的IP或是端口,传入 local对象 (继承自 NetworkBase。)To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object | |
CreateSocketAndConnect(String, Int32, Int32) |
创建一个新的socket对象并连接到远程的地址,需要指定ip地址以及端口号信息,还有超时时间,单位是毫秒 (继承自 NetworkBase。)To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds | |
CreateSocketAndConnectAsync(String, Int32) |
创建一个新的socket对象并连接到远程的地址,默认超时时间为10秒钟,需要指定ip地址以及端口号信息 (继承自 NetworkBase。)Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number. | |
CreateSocketAndConnectAsync(IPEndPoint, Int32, IPEndPoint) |
创建一个新的socket对象并连接到远程的地址,需要指定远程终结点,超时时间(单位是毫秒),如果需要绑定本地的IP或是端口,传入 local对象 (继承自 NetworkBase。)To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object | |
CreateSocketAndConnectAsync(String, Int32, Int32) |
创建一个新的socket对象并连接到远程的地址,需要指定ip地址以及端口号信息,还有超时时间,单位是毫秒 (继承自 NetworkBase。)To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds | |
DeleteAccount |
删除一个账户的信息 (继承自 NetworkAuthenticationServerBase。)Delete an account's information | |
DeleteFileByName |
删除一个指定的文件,如果文件不存在,直接返回 True,如果文件存在则直接删除,删除成功返回 True,如果发生了异常,返回False (继承自 NetworkBase。)Delete a specified file, if the file does not exist, return True directly, if the file exists, delete it directly, if the deletion is successful, return True, if an exception occurs, return False | |
Dispose | Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources. (继承自 NetworkAuthenticationServerBase。) | |
Dispose(Boolean) |
释放当前的对象
(继承自 NetworkAuthenticationServerBase。) | |
Equals | Determines whether the specified object is equal to the current object. (继承自 Object。) | |
Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (继承自 Object。) | |
GetHashCode | Serves as the default hash function. (继承自 Object。) | |
GetTrustedClients |
获取受信任的客户端列表 (继承自 NetworkAuthenticationServerBase。)Get a list of trusted clients | |
GetType | Gets the Type of the current instance. (继承自 Object。) | |
MemberwiseClone | Creates a shallow copy of the current Object. (继承自 Object。) | |
Receive(SslStream, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
Receive(Socket, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
Receive(SslStream, Byte, Int32, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
Receive(Socket, Byte, Int32, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
ReceiveAndCheckBytes |
[自校验] 接收一条完整的同步数据,包含头子节和内容字节,基础的数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends | |
ReceiveAndCheckBytesAsync |
[自校验] 接收一条完整的同步数据,包含头子节和内容字节,基础的数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends | |
ReceiveAsync(SslStream, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
ReceiveAsync(Socket, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
ReceiveAsync(SslStream, Byte, Int32, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
ReceiveAsync(Socket, Byte, Int32, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
ReceiveByMessage |
接收一条完整的 数据内容,需要指定超时时间,单位为毫秒。 (继承自 NetworkBase。)Receive a complete data content, Need to specify a timeout period in milliseconds | |
ReceiveByMessageAsync |
接收一条完整的 数据内容,需要指定超时时间,单位为毫秒。 (继承自 NetworkBase。)Receive a complete data content, Need to specify a timeout period in milliseconds | |
ReceiveBytesContentFromSocket |
[自校验] 从网络中接收一串字节数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends. | |
ReceiveBytesContentFromSocketAsync |
[自校验] 从网络中接收一串字节数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends. | |
ReceiveCommandLineFromSocket(Socket, Byte, Int32) |
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒 (继承自 NetworkBase。)To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds. | |
ReceiveCommandLineFromSocket(Socket, Byte, Byte, Int32) |
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒 (继承自 NetworkBase。)To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds. | |
ReceiveCommandLineFromSocketAsync(Socket, Byte, Int32) |
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒 (继承自 NetworkBase。)To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds. | |
ReceiveCommandLineFromSocketAsync(Socket, Byte, Byte, Int32) |
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒 (继承自 NetworkBase。)To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds. | |
ReceiveFileFromSocket(Socket, Stream, ActionInt64, Int64) |
[自校验] 从网络中接收一个文件,写入数据流,如果结果异常,则结束通讯,参数顺序文件名,文件大小,文件标识,上传人 (继承自 NetworkXBase。)[Self-checking] Receive a file from the network. If the result is abnormal, the communication ends. | |
ReceiveFileFromSocket(Socket, String, ActionInt64, Int64) |
[自校验] 从网络中接收一个文件,如果结果异常,则结束通讯 (继承自 NetworkXBase。)[Self-checking] Receive a file from the network. If the result is abnormal, the communication ends. | |
ReceiveFileFromSocketAsync(Socket, Stream, ActionInt64, Int64) |
[自校验] 从网络中接收一个文件,写入数据流,如果结果异常,则结束通讯,参数顺序文件名,文件大小,文件标识,上传人 (继承自 NetworkXBase。)[Self-checking] Receive a file from the network. If the result is abnormal, the communication ends. | |
ReceiveFileFromSocketAsync(Socket, String, ActionInt64, Int64) |
[自校验] 从网络中接收一个文件,如果结果异常,则结束通讯 (继承自 NetworkXBase。)[Self-checking] Receive a file from the network. If the result is abnormal, the communication ends. | |
ReceiveFileHeadFromSocket |
[自校验] 从套接字中接收文件头信息 (继承自 NetworkXBase。)[Self-checking] Receive file header information from socket | |
ReceiveFileHeadFromSocketAsync |
[自校验] 从套接字中接收文件头信息 (继承自 NetworkXBase。)[Self-checking] Receive file header information from socket | |
ReceiveHslMessage |
接收一条hsl协议的数据信息,自动解析,解压,解码操作,获取最后的实际的数据,接收结果依次为暗号,用户码,负载数据 (继承自 NetworkBase。)Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order. | |
ReceiveHslMessageAsync |
接收一条hsl协议的数据信息,自动解析,解压,解码操作,获取最后的实际的数据,接收结果依次为暗号,用户码,负载数据 (继承自 NetworkBase。)Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order. | |
ReceiveMqttFile |
使用MQTT协议从网络接收字节数组,然后写入文件或流中,支持进度报告 (继承自 NetworkBase。)Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report | |
ReceiveMqttFileAsync |
使用MQTT协议从网络接收字节数组,然后写入文件或流中,支持进度报告 (继承自 NetworkBase。)Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report | |
ReceiveMqttMessage(SslStream, Int32, ActionInt64, Int64) |
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据 (继承自 NetworkBase。)Receive a message of a completed MQTT protocol, including control code and payload data | |
ReceiveMqttMessage(Socket, Int32, ActionInt64, Int64) |
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据 (继承自 NetworkBase。)Receive a message of a completed MQTT protocol, including control code and payload data | |
ReceiveMqttMessageAsync(SslStream, Int32, ActionInt64, Int64) |
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据 (继承自 NetworkBase。)Receive a message of a completed MQTT protocol, including control code and payload data | |
ReceiveMqttMessageAsync(Socket, Int32, ActionInt64, Int64) |
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据 (继承自 NetworkBase。)Receive a message of a completed MQTT protocol, including control code and payload data | |
ReceiveMqttStream |
使用MQTT协议从socket接收指定长度的字节数组,然后全部写入到流中,可以指定进度报告 (继承自 NetworkBase。)Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report | |
ReceiveMqttStreamAsync |
使用MQTT协议从socket接收指定长度的字节数组,然后全部写入到流中,可以指定进度报告 (继承自 NetworkBase。)Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report | |
ReceiveRedisCommand |
从网络接收一条完整的redis报文的消息 (继承自 NetworkBase。)Receive a complete redis message from the network | |
ReceiveRedisCommandAsync |
从网络接收一条完整的redis报文的消息 (继承自 NetworkBase。)Receive a complete redis message from the network | |
ReceiveRedisCommandString |
接收一行基于redis协议的字符串的信息,需要指定固定的长度 (继承自 NetworkBase。)Receive a line of information based on the redis protocol string, you need to specify a fixed length | |
ReceiveRedisCommandStringAsync |
接收一行基于redis协议的字符串的信息,需要指定固定的长度 (继承自 NetworkBase。)Receive a line of information based on the redis protocol string, you need to specify a fixed length | |
ReceiveStringArrayContentFromSocket |
[自校验] 从网络中接收一个字符串数组,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends. | |
ReceiveStringArrayContentFromSocketAsync |
[自校验] 从网络中接收一个字符串数组,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends. | |
ReceiveStringContentFromSocket |
[自校验] 从网络中接收一个字符串数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends. | |
ReceiveStringContentFromSocketAsync |
[自校验] 从网络中接收一个字符串数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends. | |
RemoveClient |
移除一个在线的客户端信息 (继承自 NetworkAuthenticationServerBase。)Remove an online client message | |
Send(SslStream, Byte) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
Send(Socket, Byte) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
Send(SslStream, Byte, Int32, Int32) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
Send(Socket, Byte, Int32, Int32) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
SendAccountAndCheckReceive |
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendAccountAndCheckReceiveAsync |
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendAsync(SslStream, Byte) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
SendAsync(Socket, Byte) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
SendAsync(SslStream, Byte, Int32, Int32) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
SendAsync(Socket, Byte, Int32, Int32) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
SendBaseAndCheckReceive |
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendBaseAndCheckReceiveAsync |
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendBytesAndCheckReceive |
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendBytesAndCheckReceiveAsync |
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendFileAndCheckReceive(Socket, Stream, String, String, String, ActionInt64, Int64) |
[自校验] 将流数据发送至套接字,具体发送细节将在继承类中实现,如果结果异常,则结束通讯 (继承自 NetworkXBase。)[Self-checking] Send stream data to the socket. The specific sending details will be implemented in the inherited class. If the result is abnormal, the communication will be terminated | |
SendFileAndCheckReceive(Socket, String, String, String, String, ActionInt64, Int64) |
[自校验] 将文件数据发送至套接字,具体发送细节将在继承类中实现,如果结果异常,则结束通讯 (继承自 NetworkXBase。)[Self-checking] Send the file data to the socket. The specific sending details will be implemented in the inherited class. If the result is abnormal, the communication will end | |
SendFileAndCheckReceiveAsync(Socket, Stream, String, String, String, ActionInt64, Int64) |
[自校验] 将流数据发送至套接字,具体发送细节将在继承类中实现,如果结果异常,则结束通讯 (继承自 NetworkXBase。)[Self-checking] Send stream data to the socket. The specific sending details will be implemented in the inherited class. If the result is abnormal, the communication will be terminated | |
SendFileAndCheckReceiveAsync(Socket, String, String, String, String, ActionInt64, Int64) |
[自校验] 将文件数据发送至套接字,具体发送细节将在继承类中实现,如果结果异常,则结束通讯 (继承自 NetworkXBase。)[Self-checking] Send the file data to the socket. The specific sending details will be implemented in the inherited class. If the result is abnormal, the communication will end | |
SendFileStreamToSocket |
[自校验] 将文件数据发送至套接字,如果结果异常,则结束通讯 (继承自 NetworkXBase。)[Self-check] Send the file data to the socket. If the result is abnormal, the communication is ended. | |
SendFileStreamToSocketAsync |
[自校验] 将文件数据发送至套接字,如果结果异常,则结束通讯 (继承自 NetworkXBase。)[Self-check] Send the file data to the socket. If the result is abnormal, the communication is ended. | |
SendMessage(AppSession, Int32, Byte) |
向指定的通信对象发送字节数据
| |
SendMessage(AppSession, Int32, String) |
向指定的通信对象发送字符串数据
| |
SendMessage(AppSession, Int32, String) |
向指定的通信对象发送字符串数组
| |
SendMqttFile(Socket, Stream, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken) |
使用MQTT协议将一个数据流发送到网络上去,需要保存的文件名,可选指定文件描述信息,进度报告 (继承自 NetworkBase。)Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report | |
SendMqttFile(Socket, String, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken) |
使用MQTT协议将一个文件发送到网络上去,需要指定文件名,保存的文件名,可选指定文件描述信息,进度报告 (继承自 NetworkBase。)To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report | |
SendMqttFileAsync(Socket, Stream, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken) |
使用MQTT协议将一个数据流发送到网络上去,需要保存的文件名,可选指定文件描述信息,进度报告 (继承自 NetworkBase。)Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report | |
SendMqttFileAsync(Socket, String, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken) |
使用MQTT协议将一个文件发送到网络上去,需要指定文件名,保存的文件名,可选指定文件描述信息,进度报告 (继承自 NetworkBase。)To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report | |
SendMqttStream |
使用MQTT协议将流中的数据读取到字节数组,然后都写入到socket里面,可以指定进度报告,主要用于将文件发送到网络。 (继承自 NetworkBase。)Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network. | |
SendMqttStreamAsync |
使用MQTT协议将流中的数据读取到字节数组,然后都写入到socket里面,可以指定进度报告,主要用于将文件发送到网络。 (继承自 NetworkBase。)Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network. | |
SendStreamToSocket |
发送一个流的所有数据到指定的网络套接字,需要指定发送的数据长度,支持按照百分比的进度报告 (继承自 NetworkBase。)Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage. | |
SendStreamToSocketAsync |
发送一个流的所有数据到指定的网络套接字,需要指定发送的数据长度,支持按照百分比的进度报告 (继承自 NetworkBase。)Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage. | |
SendStringAndCheckReceive(Socket, Int32, String) |
[自校验] 直接发送字符串数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendStringAndCheckReceive(Socket, Int32, String) |
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendStringAndCheckReceiveAsync(Socket, Int32, String) |
[自校验] 直接发送字符串数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendStringAndCheckReceiveAsync(Socket, Int32, String) |
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
ServerClose |
关闭服务器的引擎 (继承自 NetworkServerBase。)Shut down the server's engine | |
ServerStart |
使用已经配置好的端口启动服务器的引擎 (继承自 NetworkServerBase。)Use the configured port to start the server's engine | |
ServerStart(Int32) |
指定端口号来启动服务器的引擎 (继承自 NetworkServerBase。)Specify the port number to start the server's engine | |
SetTrustedIpAddress |
设置并启动受信任的客户端登录并读写,如果为null,将关闭对客户端的ip验证 (继承自 NetworkAuthenticationServerBase。)Set and start the trusted client login and read and write, if it is null, the client's IP verification will be turned off | |
SocketAcceptExtraCheck |
当客户端的socket登录的时候额外检查的信息,检查当前会话的用户名和密码 (继承自 NetworkAuthenticationServerBase。)Additional check information when the client's socket logs in, check the username and password of the current session | |
SocketAsyncCallBack |
从远程Socket异步接收的数据信息
(继承自 NetworkAuthenticationServerBase。) | |
StartInitialization |
服务器启动时额外的初始化信息,可以用于启动一些额外的服务的操作。 (继承自 NetworkServerBase。)The extra initialization information when the server starts can be used to start some additional service operations. | |
ThreadPoolLogin |
当接收到了新的请求的时候执行的操作
(重写 NetworkAuthenticationServerBaseThreadPoolLogin(Socket, IPEndPoint).) | |
ThreadPoolLoginAfterClientCheck |
当客户端登录后,在Ip信息的过滤后,然后触发本方法,进行后续的数据接收,处理,并返回相关的数据信息 (继承自 NetworkAuthenticationServerBase。)When the client logs in, after filtering the IP information, this method is then triggered to perform subsequent data reception, processing, and return related data information | |
ToString | Returns a string that represents the current object. (重写 NetworkAuthenticationServerBaseToString.) | |
WriteStreamFromSocket |
从套接字中接收所有的数据然后写入到指定的流当中去,需要指定数据的长度,支持按照百分比进行进度报告 (继承自 NetworkBase。)Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage. | |
WriteStreamFromSocketAsync |
从套接字中接收所有的数据然后写入到指定的流当中去,需要指定数据的长度,支持按照百分比进行进度报告 (继承自 NetworkBase。)Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage. |
名称 | 说明 | |
---|---|---|
OnClientOffline |
当客户端下线时候的触发的事件 (继承自 NetworkAuthenticationServerBase。)Event triggered when the client goes offline | |
OnClientOnline |
当客户端上线时候的触发的事件 (继承自 NetworkAuthenticationServerBase。)Event triggered when the client goes online | |
ReceivedBytesEvent |
接收字节信息的事件
| |
ReceiveStringArrayEvent |
接收字符串数组信息的事件
| |
ReceiveStringEvent |
接收字符串信息的事件
|
名称 | 说明 | |
---|---|---|
CoreSocket |
对客户端而言是的通讯用的套接字,对服务器来说是用于侦听的套接字 (继承自 NetworkXBase。)A communication socket for the client, or a listening socket for the server | |
fileCacheSize |
文件传输的时候的缓存大小,直接影响传输的速度,值越大,传输速度越快,越占内存,默认为100K大小 (继承自 NetworkBase。)The size of the cache during file transfer directly affects the speed of the transfer. The larger the value, the faster the transfer speed and the more memory it takes. The default size is 100K. |
名称 | 说明 | |
---|---|---|
ToJsonString |
获取当前对象的JSON格式表示的字符串。 (由 HslExtension 定义。)Gets the string represented by the JSON format of the current object. |
private NetSimplifyServer simplifyServer; private Timer timerSecond; private void Start() { try { simplifyServer = new NetSimplifyServer( ); // 实例化 simplifyServer.Token = new Guid( textBox3.Text ); // 设置令牌 simplifyServer.ReceiveStringEvent += SimplifyServer_ReceiveStringEvent; // 接收字符串的时候触发 simplifyServer.ReceiveStringArrayEvent += SimplifyServer_ReceiveStringArrayEvent; simplifyServer.LogNet = new HslCommunication.LogNet.LogNetSingle( Application.StartupPath + @"\Logs\log.txt" ); simplifyServer.LogNet.BeforeSaveToFile += LogNet_BeforeSaveToFile; // 日志保存前先显示出来 simplifyServer.AddAccount( "admin", "123456" ); simplifyServer.AddAccount( "hsl", "test" ); simplifyServer.IsUseAccountCertificate = checkBox1.Checked; simplifyServer.ServerStart( int.Parse( textBox1.Text ) ); // 启动服务 userButton1.Enabled = false; timerSecond = new Timer( ); // 这个定时器的功能是每秒更新在线的客户端数量 timerSecond.Interval = 1000; timerSecond.Tick += TimerSecond_Tick; timerSecond.Start( ); } catch(Exception ex ) { MessageBox.Show( "创建失败:" + ex.Message ); } } private void SimplifyServer_ReceiveStringArrayEvent( AppSession setssion, NetHandle handle, string[] array ) { simplifyServer.SendMessage( setssion, handle, array ); } private void TimerSecond_Tick( object sender, EventArgs e ) { label6.Text = simplifyServer.ClientCount.ToString( ); } private void LogNet_BeforeSaveToFile( object sender, HslCommunication.LogNet.HslEventArgs e ) { if(InvokeRequired) { BeginInvoke( new Action<object, HslCommunication.LogNet.HslEventArgs>( LogNet_BeforeSaveToFile), sender, e ); return; } textBox2.AppendText( e.HslMessage.ToString( ) + Environment.NewLine ); } private void SimplifyServer_ReceiveStringEvent( AppSession session, NetHandle handle, string value ) { if (handle == 1) { // 当收到客户端发来的信号1的时候进行操作的消息 simplifyServer.SendMessage( session, handle, "这是测试信号:" + value ); } else if (handle < 100) { simplifyServer.SendMessage( session, handle, "这是测试信号:" + handle ); } else { System.Threading.Thread.Sleep( 1000 ); simplifyServer.SendMessage( session, handle, "不支持的消息" ); } if (checkBox2.Checked) { // 显示出来,谁发的,发了什么 textBox2.Invoke( new Action( ( ) => { textBox2.AppendText( $"{session} [{handle}] {value}" + Environment.NewLine ); } ) ); } } private void userButton1_Click( object sender, EventArgs e ) { // 点击了启动服务的按钮 Start( ); }