OpenProtocolNetBuildReadCommand 方法

public static OperateResult<byte[]> BuildReadCommand(
	int mid,
	int revison,
	int stationId,
	int spindleId,
	List<string> parameters
)

Public Shared Function BuildReadCommand ( 
	mid As Integer,
	revison As Integer,
	stationId As Integer,
	spindleId As Integer,
	parameters As List(Of String)
) As OperateResult(Of Byte())

public:
static OperateResult<array<unsigned char>^>^ BuildReadCommand(
	int mid, 
	int revison, 
	int stationId, 
	int spindleId, 
	List<String^>^ parameters
)

static member BuildReadCommand : 
        mid : int * 
        revison : int * 
        stationId : int * 
        spindleId : int * 
        parameters : List<string> -> OperateResult<byte[]> 

参数

mid

类型：SystemInt32
The MID is four bytes long and is specified by four ASCII digits(‘0’…’9’). The MID describes how to interpret the message.

revison

类型：SystemInt32
The revision of the MID is specified by three ASCII digits(‘0’…’9’).The MID revision is unique per MID and is used in case several versions are available for the same MID.

stationId

类型：SystemInt32
The station the message is addressed to in the case of controller with multi-station configuration.The station ID is 1 byte long and is specified by one ASCII digit(‘0’…’9’).

spindleId

类型：SystemInt32
The spindle the message is addressed to in the case several spindles are connected to the same controller. The spindle ID is 2 bytes long and is specified by two ASCII digits (‘0’…’9’).

parameters

类型：System.Collections.GenericListString
The Data Field is ASCII data representing the data. The data contains a list of parameters depending on the MID.Each parameter is represented with an ID and the parameter value.

返回值

引用