SickIcrTcpServer 类

实例化一个默认的服务器对象
Instantiate a default server object

检查串口接收到的数据是否完整

获取一个新的消息对象的方法，需要在继承类里面进行重写
The method to get a new message object needs to be overridden in the inheritance class

创建会话状态的委托对象，也就可以自己指定创建自定义的会话

获取或设置服务器是否支持IPv6的地址协议信息
Get or set whether the server supports IPv6 address protocol information

获取或设置当前的服务器接收串口数据时候，是否强制只接收一次数据，默认为false，适合点对点通信，如果你总线形式的连接，则需要设置 True
Get or set whether to force the data to be received only once when the current server receives serial port data. The default value is false, which is suitable for point-to-point communication. If you have a bus connection, you need to set True

服务器引擎是否启动
Whether the server engine is started

记录一些调试日志的委托，将会进行输出调试文本。
The delegate that records some debug logs will output debug text.

组件的日志工具，支持日志记录，只要实例化后，当前网络的基本信息，就以DEBUG等级进行输出
The component's logging tool supports logging. As long as the instantiation of the basic network information, the output will be output at DEBUG

获取或设置服务器的端口号，如果是设置，需要在服务器启动前设置完成，才能生效。
Gets or sets the port number of the server. If it is set, it needs to be set before the server starts to take effect.

获取或设置串口模式下，接收一条数据最短的时间要求，当设备发送的数据非常慢的时候，或是分割发送数据的时候，就需要将本值设置的大一点，默认为20ms
Get or set the shortest time required to receive a piece of data in serial port mode. When the data sent by the device is very slow, or when the data is divided and sent, you need to set this value to a larger value, the default is 20ms

获取或设置当前允许登录的最大客户端数量，默认为 uint.MaxValue = 4294967295
Gets or sets the maximum number of clients that are currently allowed to log in, which defaults to uint.MaxValue = 4294967295

获取或设置客户端的Socket的心跳时间信息，这个是Socket底层自动实现的心跳包，不基于协议层实现。默认小于0，不开启心跳检测，如果需要开启，设置 60_000 比较合适，单位毫秒
Get or set the heartbeat time information of the Socket of the client. This is the heartbeat packet automatically implemented by the bottom layer of the Socket, not based on the protocol layer. The default value is less than 0, and heartbeat detection is not enabled. If you need to enable it, it is more appropriate to set 60_000, in milliseconds.

当线程检查后，进行登录之前的检查，通常用于自定义的握手包校验操作。仅对TCP通信的时候有效。

获取或设置一次接收时的数据长度，默认2KB数据长度，特殊情况的时候需要调整
Gets or sets the length of data received at a time. The default length is 2KB

新增加一个管道会话信息
A new pipeline session information has been added

检查串口接收的数据是否完成的方法，如果接收完成，则返回True

关闭提供从机服务的串口对象
Close the serial port object that provides slave services

创建一个指定的异形客户端连接，使用Hsl协议来发送注册包
Create a specified profiled client connection and use the Hsl protocol to send registration packets

新增一个主动连接的请求，将不会收到是否连接成功的信息，当网络中断及奔溃之后，会自动重新连接。
A new active connection request will not receive a message whether the connection is successful. When the network is interrupted and crashed, it will automatically reconnect.

Determines whether the specified object is equal to the current object.

关闭的时候额外执行的功能代码

服务器启动的时候额外执行的功能代码

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

Serves as the default hash function.

获取一个新的消息对象的方法，需要在继承类里面进行重写
The method to get a new message object needs to be overridden in the inheritance class

获取管道会话的列表
Get a list of pipeline sessions

获取受信任的客户端列表
Get a list of trusted clients

Gets the Type of the current instance.

记录当前的日志信息

Creates a shallow copy of the current Object.

指定超时时间移除当前的会话列表，只有是TCP的管道（PipeTcpNet）才需要被移除。
Specify a timeout to remove the current session list. Only TCP pipe (PipeTcpNet) need to be removed.

移除一个管道会话
Remove a pipeline session

关闭服务器的引擎
Shut down the server's engine

指定端口号来启动服务器的引擎
Specify the port number to start the server's engine

指定端口号来启动服务器的引擎
Specify the port number to start the server's engine

指定端口号来启动服务器的引擎
Specify the port number to start the server's engine

指定一个TCP端口及UDP端口，同时启动两种模式的服务器
Specify a TCP port and a UDP port to start the server in both modes at the same time

设置当前的服务器接收的消息信息

设置并启动受信任的客户端登录并读写，如果为null，将关闭对客户端的ip验证
Set and start the trusted client login and read and write, if it is null, the client's IP verification will be turned off

当客户端的socket登录的时候额外检查的操作，并返回操作的结果信息。
The operation is additionally checked when the client's socket logs in, and the result information of the operation is returned.

启动串口的从机服务，使用自定义的初始化方法初始化串口的参数
Start the slave service of serial and initialize the parameters of the serial port using a custom initialization method

启动串口的从机服务，使用默认的参数进行初始化串口，9600波特率，8位数据位，无奇偶校验，1位停止位
Start the slave service of serial, initialize the serial port with default parameters, 9600 baud rate, 8 data bits, no parity, 1 stop bit

启动串口的从机服务，使用默认的参数进行初始化串口，8位数据位，无奇偶校验，1位停止位
Start the slave service of serial, initialize the serial port with default parameters, 8 data bits, no parity, 1 stop bit

启动串口的从机服务，使用指定的参数进行初始化串口，指定数据位，指定奇偶校验，指定停止位

当客户端连接到服务器，并听过额外的检查后，进行回调的方法
Callback method when the client connects to the server and has heard additional checks

Returns a string that represents the current object.

使用SSL通信，传递一个证书的对象

使用SSL通信，传递一个证书的路径，以及证书的密码

当客户端下线时候的触发的事件
Event triggered when the client goes offline

当客户端上线时候的触发的事件
Event triggered when the client goes online

当管道接收到消息时触发

当接收到条码数据的时候触发
Triggered when barcode data is received

核心的socket服务器

获取当前对象的JSON格式表示的字符串。
Gets the string represented by the JSON format of the current object.