InovanceAMTcp 类

实例化一个安川AM400-AM800系列的网络通讯协议
Instantiate a network communication protocol of Yaskawa AM400-AM800 series

指定服务器地址，端口号，客户端自己的站号来实例化一个安川AM400-AM800系列的网络通讯协议
Specify the server address, port number, and client's own station number to instantiate a Yaskawa AM400-AM800 series network communication protocol

获取或设置起始的地址是否从0开始，默认为True
Gets or sets whether the starting address starts from 0. The default is True

当前的异形连接对象，如果设置了异形连接的话，仅用于异形模式的情况使用
The current alien connection object, if alien connection is set, is only used in the case of alien mode

当前的数据变换机制，当你需要从字节数据转换类型数据的时候需要。
The current data transformation mechanism is required when you need to convert type data from byte data.

当前连接的唯一ID号，默认为长度20的guid码加随机数组成，方便列表管理，也可以自己指定
The unique ID number of the current connection. The default is a 20-digit guid code plus a random number.

获取或设置连接的超时时间，单位是毫秒
Gets or sets the timeout for the connection, in milliseconds

获取或设置数据解析的格式，可选ABCD, BADC，CDAB，DCBA格式，对int,uint,float,double,long,ulong类型有作用
Get or set the format of the data analysis, optional ABCD, BADC, CDAB, DCBA format, effective for int, uint, float, double, long, ulong type

获取或是设置远程服务器的IP地址，如果是本机测试，那么需要设置为127.0.0.1
Get or set the IP address of the remote server. If it is a local test, then it needs to be set to 127.0.0.1

字符串数据是否按照字来反转，默认为False
Whether the string data is reversed according to words. The default is False.

获取或设置绑定的本地的IP地址和端口号信息，如果端口设置为0，代表任何可用的端口
Get or set the bound local IP address and port number information, if the port is set to 0, it means any available port

组件的日志工具，支持日志记录，只要实例化后，当前网络的基本信息，就以DEBUG等级进行输出
The component's logging tool supports logging. As long as the instantiation of the basic network information, the output will be output at DEBUG

获取modbus协议自增的消息号，你可以自定义modbus的消息号的规则，详细参见ModbusTcpNet说明，也可以查找SoftIncrementCount说明。
Get the message number incremented by the modbus protocol. You can customize the rules of the message number of the modbus. For details, please refer to the description of ModbusTcpNet, or you can find the description of SoftIncrementCount

获取或设置服务器的端口号，具体的值需要取决于对方的配置
Gets or sets the port number of the server. The specific value depends on the configuration of the other party.

获取或设置接收服务器反馈的时间，如果为负数，则不接收反馈
Gets or sets the time to receive server feedback, and if it is a negative number, does not receive feedback

获取或设置在正式接收对方返回数据前的时候，需要休息的时间，当设置为0的时候，不需要休息。
Get or set the time required to rest before officially receiving the data from the other party. When it is set to 0, no rest is required.

获取或者重新修改服务器的默认站号信息，当然，你可以再读写的时候动态指定，参见备注
Get or modify the default station number information of the server. Of course, you can specify it dynamically when reading and writing, see note

网络类的身份令牌，在hsl协议的模式下会有效，在和设备进行通信的时候是无效的
Network-type identity tokens will be valid in the hsl protocol mode and will not be valid when communicating with the device

一个字单位的数据表示的地址长度，西门子为2，三菱，欧姆龙，modbusTcp就为1，AB PLC无效
The address length represented by one word of data, Siemens is 2, Mitsubishi, Omron, modbusTcp is 1, AB PLC is invalid

认证账号，根据已经设置的用户名和密码，进行发送服务器进行账号认证。
Authentication account, according to the user name and password that have been set, sending server for account authentication.

认证账号，根据已经设置的用户名和密码，进行发送服务器进行账号认证。
Authentication account, according to the user name and password that have been set, sending server for account authentication.

检查当前的头子节信息的令牌是否是正确的，仅用于某些特殊的协议实现
Check whether the token of the current header subsection information is correct, only for some special protocol implementations

手动断开与远程服务器的连接，如果当前是长连接模式，那么就会切换到短连接模式
Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode

手动断开与远程服务器的连接，如果当前是长连接模式，那么就会切换到短连接模式
Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode

尝试连接远程的服务器，如果连接成功，就切换短连接模式到长连接模式，后面的每次请求都共享一个通道，使得通讯速度更快速
Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster.

使用指定的套接字创建异形客户端，在异形客户端的模式下，网络通道需要被动创建。
Use the specified socket to create the alien client. In the alien client mode, the network channel needs to be created passively.

尝试连接远程的服务器，如果连接成功，就切换短连接模式到长连接模式，后面的每次请求都共享一个通道，使得通讯速度更快速
Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster.

创建一个新的socket对象并连接到远程的地址，默认超时时间为10秒钟，需要指定ip地址以及端口号信息
Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number.

创建一个新的socket对象并连接到远程的地址，需要指定远程终结点，超时时间（单位是毫秒），如果需要绑定本地的IP或是端口，传入 local对象
To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object

创建一个新的socket对象并连接到远程的地址，需要指定ip地址以及端口号信息，还有超时时间，单位是毫秒
To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds

创建一个新的socket对象并连接到远程的地址，默认超时时间为10秒钟，需要指定ip地址以及端口号信息
Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number.

创建一个新的socket对象并连接到远程的地址，需要指定远程终结点，超时时间（单位是毫秒），如果需要绑定本地的IP或是端口，传入 local对象
To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object

创建一个新的socket对象并连接到远程的地址，需要指定ip地址以及端口号信息，还有超时时间，单位是毫秒
To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds

删除文件的操作
Delete file operation

释放当前的资源

释放当前的资源，并自动关闭长连接，如果设置了的话

Determines whether the specified object is equal to the current object.

和服务器交互完成的时候调用的方法，可以根据读写结果进行一些额外的操作，具体的操作需要根据实际的需求来重写实现
The method called when the interaction with the server is completed can perform some additional operations based on the read and write results. The specific operations need to be rewritten according to actual needs.

根据实际的协议选择是否重写本方法，有些协议在断开连接之前，需要发送一些报文来关闭当前的网络通道
Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting.

根据实际的协议选择是否重写本方法，有些协议在断开连接之前，需要发送一些报文来关闭当前的网络通道
Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting.

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

获取本次操作的可用的网络通道，如果是短连接，就重新生成一个新的网络通道，如果是长连接，就复用当前的网络通道。
Obtain the available network channels for this operation. If it is a short connection, a new network channel is regenerated. If it is a long connection, the current network channel is reused.

获取本次操作的可用的网络通道，如果是短连接，就重新生成一个新的网络通道，如果是长连接，就复用当前的网络通道。
Obtain the available network channels for this operation. If it is a short connection, a new network channel is regenerated. If it is a long connection, the current network channel is reused.

Serves as the default hash function.

获取一个新的消息对象的方法，需要在继承类里面进行重写
The method to get a new message object needs to be overridden in the inheritance class

Gets the Type of the current instance.

根据实际的协议选择是否重写本方法，有些协议在创建连接之后，需要进行一些初始化的信号握手，才能最终建立网络通道。
Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created.

根据实际的协议选择是否重写本方法，有些协议在创建连接之后，需要进行一些初始化的信号握手，才能最终建立网络通道。
Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created.

对当前设备的IP地址进行PING的操作，返回PING的结果，正常来说，返回Success
PING the IP address of the current device and return the PING result. Normally, it returns Success

Creates a shallow copy of the current Object.

对当前的命令进行打包处理，通常是携带命令头内容，标记当前的命令的长度信息，需要进行重写，否则默认不打包

预处理文件夹的名称，除去文件夹名称最后一个'\'或'/'，如果有的话
Preprocess the name of the folder, removing the last '\' or '/' in the folder name

按字读取汇川PLC的数据信息，对于AM400_800的情况，可以输入MW0，MW100，对于AM600而言，还支持SDW0，SDW100地址数据
Read Huichuan PLC's data information by word. For the case of AM400_800, you can enter MW0 and MW100. For AM600, it also supports SDW0 and SDW100 address data.

读取支持Hsl特性的数据内容，该特性为HslDeviceAddressAttribute，详细参考api文档说明
Read the data content of the Hsl attribute. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details.

按字读取汇川PLC的数据信息，对于AM400_800的情况，可以输入MW0，MW100，对于AM600而言，还支持SDW0，SDW100地址数据
Read Huichuan PLC's data information by word. For the case of AM400_800, you can enter MW0 and MW100. For AM600, it also supports SDW0 and SDW100 address data.

异步读取支持Hsl特性的数据内容，该特性为HslDeviceAddressAttribute，详细参考api文档说明
Asynchronously read the data content of the Hsl attribute. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details.

读取单个的Boolean数据信息
Read a single Boolean data message

按位读取汇川PLC的数据信息，对于AM400_800的情况，可以输入QX0.1，IX0.1，对于AM600而言，还支持SMX0.1地址数据
Read the data of Huichuan PLC bit by bit. For the case of AM400_800, you can enter QX0.1 and IX0.1. For AM600, it also supports SMX0.1 address data.

异步读取单个的Boolean数据信息
Asynchronously read a single Boolean data message

按位读取汇川PLC的数据信息，对于AM400_800的情况，可以输入QX0.1，IX0.1，对于AM600而言，还支持SMX0.1地址数据
Read the data of Huichuan PLC bit by bit. For the case of AM400_800, you can enter QX0.1 and IX0.1. For AM600, it also supports SMX0.1 address data.

读取线圈，需要指定起始地址，如果富文本地址不指定，默认使用的功能码是 0x01
To read the coil, you need to specify the start address. If the rich text address is not specified, the default function code is 0x01.

批量的读取线圈，需要指定起始地址，读取长度，如果富文本地址不指定，默认使用的功能码是 0x01
For batch reading coils, you need to specify the start address and read length. If the rich text address is not specified, the default function code is 0x01.

读取线圈，需要指定起始地址，如果富文本地址不指定，默认使用的功能码是 0x01
To read the coil, you need to specify the start address. If the rich text address is not specified, the default function code is 0x01.

批量的读取线圈，需要指定起始地址，读取长度，如果富文本地址不指定，默认使用的功能码是 0x01
For batch reading coils, you need to specify the start address and read length. If the rich text address is not specified, the default function code is 0x01.

读取自定义的数据类型，需要继承自IDataTransfer接口
Read custom data types, need to inherit from IDataTransfer interface

异步写入自定义类型的数据，该类型必须继承自IDataTransfer接口
Asynchronously write data of a custom type, which must inherit from the IDataTransfer interface

读取输入线圈，需要指定起始地址，如果富文本地址不指定，默认使用的功能码是 0x02
To read the input coil, you need to specify the start address. If the rich text address is not specified, the default function code is 0x02.

批量的读取输入点，需要指定起始地址，读取长度，如果富文本地址不指定，默认使用的功能码是 0x02
To read input points in batches, you need to specify the start address and read length. If the rich text address is not specified, the default function code is 0x02

读取输入线圈，需要指定起始地址，如果富文本地址不指定，默认使用的功能码是 0x02
To read the input coil, you need to specify the start address. If the rich text address is not specified, the default function code is 0x02.

批量的读取输入点，需要指定起始地址，读取长度，如果富文本地址不指定，默认使用的功能码是 0x02
To read input points in batches, you need to specify the start address and read length. If the rich text address is not specified, the default function code is 0x02

读取双浮点的数据
Read double floating point data

读取双浮点数据的数组
Read double floating point data array

异步读取双浮点的数据
Asynchronously read double floating point data

异步读取双浮点数据的数组
Asynchronously read double floating point data array

读取单浮点数据
Read single floating point data

读取单浮点精度的数组
Read single floating point array

异步读取单浮点数据
Asynchronously read single floating point data

异步读取单浮点精度的数组
Asynchronously read single floating point array

将数据发送到当前的网络通道中，并从网络通道中接收一个INetMessage指定的完整的报文，网络通道将根据GetAvailableSocket方法自动获取，本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.

将数据发送到当前的网络通道中，并从网络通道中接收一个INetMessage指定的完整的报文，网络通道将根据GetAvailableSocket方法自动获取，本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.

将数据报文发送指定的网络通道上，根据当前指定的INetMessage类型，返回一条完整的数据指令
Sends a data message to the specified network channel, and returns a complete data command according to the currently specified INetMessage type

将数据发送到当前的网络通道中，并从网络通道中接收一个INetMessage指定的完整的报文，网络通道将根据GetAvailableSocket方法自动获取，本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.

将数据发送到当前的网络通道中，并从网络通道中接收一个INetMessage指定的完整的报文，网络通道将根据GetAvailableSocket方法自动获取，本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.

将数据报文发送指定的网络通道上，根据当前指定的INetMessage类型，返回一条完整的数据指令
Sends a data message to the specified network channel, and returns a complete data command according to the currently specified INetMessage type

读取16位的有符号的整型数据
Read 16-bit signed integer data

读取16位的有符号整型数组
Read 16-bit signed integer array

异步读取16位的有符号的整型数据
Asynchronously read 16-bit signed integer data

异步读取16位的有符号整型数组
Asynchronously read 16-bit signed integer array

读取32位的有符号整型
Read 32-bit signed integer

读取32位有符号整型数组
Read 32-bit signed integer array

异步读取32位的有符号整型
Asynchronously read 32-bit signed integer

异步读取32位有符号整型数组
Asynchronously read 32-bit signed integer array

读取64位的有符号整型
Read 64-bit signed integer

读取64位的有符号整型数组
Read 64-bit signed integer array

异步读取64位的有符号整型
Asynchronously read 64-bit signed integer

异步读取64位的有符号整型数组
Asynchronously read 64-bit signed integer array

读取流中的数据到缓存区，读取的长度需要按照实际的情况来判断
Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation.

读取流中的数据到缓存区，读取的长度需要按照实际的情况来判断
Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation.

读取字符串数据，默认为最常见的ASCII编码
Read string data, default is the most common ASCII encoding

使用指定的编码，读取字符串数据
Reads string data using the specified encoding

异步读取字符串数据，默认为最常见的ASCII编码
Asynchronously read string data, default is the most common ASCII encoding

异步使用指定的编码，读取字符串数据
Asynchronously reads string data using the specified encoding

读取16位的无符号整型
Read 16-bit unsigned integer

读取16位的无符号整型数组
Read 16-bit unsigned integer array

异步读取16位的无符号整型
Asynchronously read 16-bit unsigned integer

异步读取16位的无符号整型数组
Asynchronously read 16-bit unsigned integer array

读取32位的无符号整型
Read 32-bit unsigned integer

读取32位的无符号整型数组
Read 32-bit unsigned integer array

异步读取32位的无符号整型
Asynchronously read 32-bit unsigned integer

异步读取32位的无符号整型数组
Asynchronously read 32-bit unsigned integer array

读取64位的无符号整型
Read 64-bit unsigned integer

读取64位的无符号整型的数组
Read 64-bit unsigned integer array

异步读取64位的无符号整型
Asynchronously read 64-bit unsigned integer

异步读取64位的无符号整型的数组
Asynchronously read 64-bit unsigned integer array

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

[自校验] 接收一条完整的同步数据，包含头子节和内容字节，基础的数据，如果结果异常，则结束通讯
[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends

[自校验] 接收一条完整的同步数据，包含头子节和内容字节，基础的数据，如果结果异常，则结束通讯
[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

接收一条完整的 数据内容，需要指定超时时间，单位为毫秒。
Receive a complete data content, Need to specify a timeout period in milliseconds

接收一条完整的 数据内容，需要指定超时时间，单位为毫秒。
Receive a complete data content, Need to specify a timeout period in milliseconds

[自校验] 从网络中接收一串字节数据，如果结果异常，则结束通讯
[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends.

[自校验] 从网络中接收一串字节数据，如果结果异常，则结束通讯
[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends.

接收一行命令数据，需要自己指定这个结束符，默认超时时间为60秒，也即是60000，单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.

接收一行命令数据，需要自己指定这个结束符，默认超时时间为60秒，也即是60000，单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.

接收一行命令数据，需要自己指定这个结束符，默认超时时间为60秒，也即是60000，单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.

接收一行命令数据，需要自己指定这个结束符，默认超时时间为60秒，也即是60000，单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.

从socket接收一条WebSocketMessage片段数据，返回WebSocketMessage的数据信息和是否最后一条数据内容
Receive a piece of WebSocketMessage fragment data from the socket, return the data information of WebSocketMessage and whether the last data content

从socket接收一条WebSocketMessage片段数据，返回WebSocketMessage的数据信息和是否最后一条数据内容
Receive a piece of WebSocketMessage fragment data from the socket, return the data information of WebSocketMessage and whether the last data content

接收一条hsl协议的数据信息，自动解析，解压，解码操作，获取最后的实际的数据，接收结果依次为暗号，用户码，负载数据
Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order.

接收一条hsl协议的数据信息，自动解析，解压，解码操作，获取最后的实际的数据，接收结果依次为暗号，用户码，负载数据
Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order.

使用MQTT协议从网络接收字节数组，然后写入文件或流中，支持进度报告
Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report

使用MQTT协议从网络接收字节数组，然后写入文件或流中，支持进度报告
Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report

接收一条完整的MQTT协议的报文信息，包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data

接收一条完整的MQTT协议的报文信息，包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data

使用MQTT协议从socket接收指定长度的字节数组，然后全部写入到流中，可以指定进度报告
Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report

使用MQTT协议从socket接收指定长度的字节数组，然后全部写入到流中，可以指定进度报告
Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report

从网络接收一条完整的redis报文的消息
Receive a complete redis message from the network

从网络接收一条完整的redis报文的消息
Receive a complete redis message from the network

接收一行基于redis协议的字符串的信息，需要指定固定的长度
Receive a line of information based on the redis protocol string, you need to specify a fixed length

接收一行基于redis协议的字符串的信息，需要指定固定的长度
Receive a line of information based on the redis protocol string, you need to specify a fixed length

[自校验] 从网络中接收一个字符串数组，如果结果异常，则结束通讯
[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends.

[自校验] 从网络中接收一个字符串数组，如果结果异常，则结束通讯
[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends.

[自校验] 从网络中接收一个字符串数据，如果结果异常，则结束通讯
[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends.

[自校验] 从网络中接收一个字符串数据，如果结果异常，则结束通讯
[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends.

从socket接收一条完整的websocket数据，返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage

从socket接收一条完整的websocket数据，返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

[自校验] 直接发送字符串数组并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 直接发送字符串数组并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

[自校验] 发送字节数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 发送字节数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 发送字节数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 发送字节数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

使用MQTT协议将一个数据流发送到网络上去，需要保存的文件名，可选指定文件描述信息，进度报告
Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report

使用MQTT协议将一个文件发送到网络上去，需要指定文件名，保存的文件名，可选指定文件描述信息，进度报告
To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report

使用MQTT协议将一个数据流发送到网络上去，需要保存的文件名，可选指定文件描述信息，进度报告
Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report

使用MQTT协议将一个文件发送到网络上去，需要指定文件名，保存的文件名，可选指定文件描述信息，进度报告
To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report

使用MQTT协议将流中的数据读取到字节数组，然后都写入到socket里面，可以指定进度报告，主要用于将文件发送到网络。
Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network.

使用MQTT协议将流中的数据读取到字节数组，然后都写入到socket里面，可以指定进度报告，主要用于将文件发送到网络。
Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network.

发送一个流的所有数据到指定的网络套接字，需要指定发送的数据长度，支持按照百分比的进度报告
Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage.

发送一个流的所有数据到指定的网络套接字，需要指定发送的数据长度，支持按照百分比的进度报告
Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage.

[自校验] 直接发送字符串数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 直接发送字符串数组并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 直接发送字符串数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 直接发送字符串数组并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

设置当前的登录的账户名和密码信息，并启用账户验证的功能，账户名为空时设置不生效
Set the current login account name and password information, and enable the account verification function. The account name setting will not take effect when it is empty

在读取数据之前可以调用本方法将客户端设置为长连接模式，相当于跳过了ConnectServer的结果验证，对异形客户端无效，当第一次进行通信时再进行创建连接请求。
Before reading the data, you can call this method to set the client to the long connection mode, which is equivalent to skipping the result verification of ConnectServer, and it is invalid for the alien client. When the first communication is performed, the connection creation request is performed.

Returns a string that represents the current object.

根据对方返回的报文命令，对命令进行基本的拆包，例如各种Modbus协议拆包为统一的核心报文，还支持对报文的验证

等待指定地址的Boolean值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the Boolean value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的Int16值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the Int16 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的Int32值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the Int32 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的Int64值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the Int64 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的UInt16值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the UInt16 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的UInt32值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the UInt32 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的UInt64值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the UInt64 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的Boolean值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the Boolean value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的Int16值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the Int16 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的Int32值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the Int32 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的Int64值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the Int64 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的UInt16值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the UInt16 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的UInt32值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the UInt32 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

等待指定地址的UInt64值为指定的值，可以指定刷新数据的频率，等待的超时时间，如果超时时间为-1的话，则是无期限等待。
Waiting for the UInt64 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait.

写入double数据，返回是否成功
Write double data, return whether the write was successful

写入short数组，返回是否成功
Write short array, return whether the write was successful

写入int数据，返回是否成功
Write int data, return whether the write was successful

写入long数据，返回是否成功
Write long data, return whether the write was successful

写入float数据，返回是否成功
Write float data, return whether the write was successful

写入字符串信息，编码为ASCII
Write string information, encoded as ASCII

写入ushort数组，返回是否成功
Write ushort array, return whether the write was successful

写入uint数据，返回是否成功
Write uint data, return whether the write was successful

写入ulong数据，返回是否成功
Write ulong data, return whether the write was successful

写入double数组，返回是否成功
Write double array, return whether the write was successful

写入int[]数组，返回是否成功
Write int array, return whether the write was successful

写入long数组，返回是否成功
Write long array, return whether the write was successful

写入float数组，返回是否成功
Write float array, return whether the write was successful

写入uint[]数组，返回是否成功
Write uint array, return whether the write was successful

写入ulong数组，返回是否成功
Write ulong array, return whether the write was successful

写入汇川PLC一个bool数据，对于AM400_800的情况，可以输入QX0.1，对于AM600而言，还支持SMX0.1地址数据
Write a bool data of Huichuan PLC. For the case of AM400_800, you can enter QX0.1. For AM600, it also supports SMX0.1 address data.

按位写入汇川PLC的数据信息，对于AM400_800的情况，可以输入QX0.1，对于AM600而言，还支持SMX0.1地址数据
Write the data information of Huichuan PLC bit by bit. For AM400_800, you can enter QX0.1. For AM600, it also supports SMX0.1 address data

按字写入汇川PLC的数据信息，对于AM400_800的情况，可以输入MW0，MW100，对于AM600而言，还支持SDW0，SDW100地址数据
Write the data information of Huichuan PLC by word. For the case of AM400_800, you can enter MW0 and MW100. For AM600, it also supports SDW0 and SDW100 address data.

写入汇川PLC的一个字数据，对于AM400_800的情况，可以输入MW0，MW100，对于AM600而言，还支持SDW0，SDW100地址数据
Write one word data of Huichuan PLC. For the case of AM400_800, you can enter MW0 and MW100. For AM600, it also supports SDW0 and SDW100 address data.

写入汇川PLC的一个字数据，对于AM400_800的情况，可以输入MW0，MW100，对于AM600而言，还支持SDW0，SDW100地址数据
Write one word data of Huichuan PLC. For the case of AM400_800, you can enter MW0 and MW100. For AM600, it also supports SDW0 and SDW100 address data.

写入指定长度的字符串信息，如果超出，就截断字符串，如果长度不足，那就补0操作，编码为ASCII
Write string information of the specified length. If it exceeds the value, the string is truncated. If the length is not enough, it is filled with 0 and the encoding is ASCII.

写入字符串信息，需要指定的编码信息
Write string information, need to specify the encoding information

写入指定长度的字符串信息，如果超出，就截断字符串，如果长度不足，那就补0操作，编码为指定的编码信息
Write string information of the specified length. If it exceeds the value, the string is truncated. If the length is not enough, then the operation is complemented with 0 , you should specified the encoding information

写入支持Hsl特性的数据，返回是否写入成功，该特性为HslDeviceAddressAttribute，详细参考api文档说明
Write data that supports the Hsl attribute, and return whether the write was successful. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details.

异步写入double数据，返回是否成功
Asynchronously write double data, return whether the write was successful

异步写入short数组，返回是否成功
Asynchronously write short array, return whether the write was successful

异步写入int数据，返回是否成功
Asynchronously write int data, return whether the write was successful

异步写入long数据，返回是否成功
Asynchronously write long data, return whether the write was successful

异步写入float数据，返回是否成功
Asynchronously write float data, return whether the write was successful

异步写入字符串信息，编码为ASCII
Asynchronously write string information, encoded as ASCII

异步写入ushort数组，返回是否成功
Asynchronously write ushort array, return whether the write was successful

异步写入uint数据，返回是否成功
Asynchronously write uint data, return whether the write was successful

异步写入ulong数据，返回是否成功
Asynchronously write ulong data, return whether the write was successful

异步写入double数组，返回是否成功
Asynchronously write double array, return whether the write was successful

异步写入int[]数组，返回是否成功
Asynchronously write int array, return whether the write was successful

异步写入long数组，返回是否成功
Asynchronously write long array, return whether the write was successful

异步写入float数组，返回是否成功
Asynchronously write float array, return whether the write was successful

异步写入uint[]数组，返回是否成功
Asynchronously write uint array, return whether the write was successful

异步写入ulong数组，返回是否成功
Asynchronously write ulong array, return whether the write was successful

写入汇川PLC一个bool数据，对于AM400_800的情况，可以输入QX0.1，对于AM600而言，还支持SMX0.1地址数据
Write a bool data of Huichuan PLC. For the case of AM400_800, you can enter QX0.1. For AM600, it also supports SMX0.1 address data.

按位写入汇川PLC的数据信息，对于AM400_800的情况，可以输入QX0.1，对于AM600而言，还支持SMX0.1地址数据
Write the data information of Huichuan PLC bit by bit. For AM400_800, you can enter QX0.1. For AM600, it also supports SMX0.1 address data

按字写入汇川PLC的数据信息，对于AM400_800的情况，可以输入MW0，MW100，对于AM600而言，还支持SDW0，SDW100地址数据
Write the data information of Huichuan PLC by word. For the case of AM400_800, you can enter MW0 and MW100. For AM600, it also supports SDW0 and SDW100 address data.

写入汇川PLC的一个字数据，对于AM400_800的情况，可以输入MW0，MW100，对于AM600而言，还支持SDW0，SDW100地址数据
Write one word data of Huichuan PLC. For the case of AM400_800, you can enter MW0 and MW100. For AM600, it also supports SDW0 and SDW100 address data.

写入汇川PLC的一个字数据，对于AM400_800的情况，可以输入MW0，MW100，对于AM600而言，还支持SDW0，SDW100地址数据
Write one word data of Huichuan PLC. For the case of AM400_800, you can enter MW0 and MW100. For AM600, it also supports SDW0 and SDW100 address data.

异步写入指定长度的字符串信息，如果超出，就截断字符串，如果长度不足，那就补0操作，编码为ASCII
Asynchronously write string information of the specified length. If it exceeds the value, the string is truncated. If the length is not enough, it is filled with 0 and the encoding is ASCII.

异步写入字符串信息，需要指定的编码信息
Asynchronously write string information, need to specify the encoding information

异步写入指定长度的字符串信息，如果超出，就截断字符串，如果长度不足，那就补0操作，编码为指定的编码信息
Asynchronously write string information of the specified length. If it exceeds the value, the string is truncated. If the length is not enough, then the operation is complemented with 0 , you should specified the encoding information

异步写入支持Hsl特性的数据，返回是否写入成功，该特性为HslDeviceAddressAttribute，详细参考api文档说明
Asynchronously write data that supports the Hsl attribute, and return whether the write was successful. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details.

写入自定义类型的数据，该类型必须继承自IDataTransfer接口
Write data of a custom type, which must inherit from the IDataTransfer interface

异步写入自定义类型的数据，该类型必须继承自IDataTransfer接口
Asynchronously write data of a custom type, which must inherit from the IDataTransfer interface

向设备写入掩码数据，使用0x16功能码，需要确认对方是否支持相关的操作，掩码数据的操作主要针对寄存器。
To write mask data to the server, using the 0x16 function code, you need to confirm whether the other party supports related operations. The operation of mask data is mainly directed to the register.

向设备写入掩码数据，使用0x16功能码，需要确认对方是否支持相关的操作，掩码数据的操作主要针对寄存器。
To write mask data to the server, using the 0x16 function code, you need to confirm whether the other party supports related operations. The operation of mask data is mainly directed to the register.

将数据写入到Modbus的单个寄存器上去，需要指定起始地址和数据值，如果富文本地址不指定，默认使用的功能码是 0x06
To write data to a single register of Modbus, you need to specify the start address and data value. If the rich text address is not specified, the default function code is 0x06.

将数据写入到Modbus的单个寄存器上去，需要指定起始地址和数据值，如果富文本地址不指定，默认使用的功能码是 0x06
To write data to a single register of Modbus, you need to specify the start address and data value. If the rich text address is not specified, the default function code is 0x06.

将数据写入到Modbus的单个寄存器上去，需要指定起始地址和数据值，如果富文本地址不指定，默认使用的功能码是 0x06
To write data to a single register of Modbus, you need to specify the start address and data value. If the rich text address is not specified, the default function code is 0x06.

将数据写入到Modbus的单个寄存器上去，需要指定起始地址和数据值，如果富文本地址不指定，默认使用的功能码是 0x06
To write data to a single register of Modbus, you need to specify the start address and data value. If the rich text address is not specified, the default function code is 0x06.

将缓冲区的数据写入到流里面去
Write the buffer data to the stream

将缓冲区的数据写入到流里面去
Write the buffer data to the stream

从套接字中接收所有的数据然后写入到指定的流当中去，需要指定数据的长度，支持按照百分比进行进度报告
Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage.

从套接字中接收所有的数据然后写入到指定的流当中去，需要指定数据的长度，支持按照百分比进行进度报告
Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage.

对客户端而言是的通讯用的套接字，对服务器来说是用于侦听的套接字
A communication socket for the client, or a listening socket for the server

文件传输的时候的缓存大小，直接影响传输的速度，值越大，传输速度越快，越占内存，默认为100K大小
The size of the cache during file transfer directly affects the speed of the transfer. The larger the value, the faster the transfer speed and the more memory it takes. The default size is 100K.

交互的混合锁，保证交互操作的安全性
Interactive hybrid locks to ensure the security of interactive operations

是否是长连接的状态
Whether it is a long connection state

指示长连接的套接字是否处于错误的状态
Indicates if the long-connected socket is in the wrong state

是否使用账号登录，这个账户登录的功能是HSL组件创建的服务器特有的功能。
Whether to log in using an account. The function of this account login is a server-specific function created by the HSL component.

设置日志记录报文是否二进制，如果为False，那就使用ASCII码
Set whether the log message is binary, if it is False, then use ASCII code

接收数据的超时时间，单位：毫秒
Timeout for receiving data, unit: millisecond

获取当前对象的JSON格式表示的字符串。
Gets the string represented by the JSON format of the current object.